Coating

Metallic HR

High Reflective Coatings

Metallic High Reflective Coatings(Part No.: MHR)

CASIX provides metallic high reflective coatings by material of Au, Ag, Al, Cr, and Ni-Cr. These coatings are applied to where the consistent high reflection in a wide spectral rang is necessary. Their reflectivity are not higher than dielectrics HR coatings, but their HR spectrum can over near-UV, visible and near-IR. In order to prevent these metallic coatings from oxidization, these coatings have been deposited on a layer of dielectrics coating.

coating29.JPG (21499 bytes)

　

lRavg>95%@200~1200nm (Protected -Silver)

lRavg>98%@200~1200nm (Protected -Gold)

coating30.JPG (21804 bytes)

lRavg>87%@200~1200nm (Protected -Al)

lRavg>93%@200~1200nm (Enhanced -Al)

Note: Ravg is average reflectivity from wavelength 200 to 1200nm.

coatpart10.JPG (10481 bytes)