^{U-Oplaz News}

^[C-Doublers]

^{[TLD Materials]}

^{[Green Pointer]}

^{[Crystal Oven & driver]}

^{[TimePlate ultra-fast Tripler]}

^{[World's 1st Photon-Energy Converter/Calculater]}

^{[U-Oplaz Wavelength Conversion Solutions]}

^{[Broadband OPO covering 410nm to 2500nm start at $9,000]}

A unique line of Non-linear optical wavelengthconversion systems.

Now U-Oplaz offers a unique line of non-linear optical frequency conversion systems manufactured by U-Oplaz Technology, Inc., CA. The products are the direct result of the latest innovations that just come off the very front of research and development, and backed by CASIX’s cutting edge crystal technology.

For the ultra-fast laser systems, U-Oplaz offers ultrafast triplers, doublers and quadruplers as Harmonic generators for both ps and fs lasers. Our triplers feature the patented design – Time Plate^TM and is the most user friendly tripler in the market. We also offer OPAs for both fs lasers.

Standard systems:

Model #	Description
SHG-fs, ps	second harmonic generators for ultra fast laser systems, fs and ps
FHG-fs, ps	fourth harmonic generator for ultra-fast laser system, fs and ps
TP-1A	tripler for amplified ultra-fast laser systems, fs and ps,
TP-1B	tripler for ultra-fast laser systems, fs and ps, right after oscillaor
fs-OPA	fs OPA system for amplified Ti:S laser systems, tunable from 1.4mm to 2.5mm

For the nano-second laser systems, U-Oplaz offers a complete line of harmonic generators – SHG, THG, FHG, and 5HG. These harmonic generators come in with designs tailored for different laser systems.

Standard systems:

Model #	Description
SHG, THG, FHG, 5HG	2nd, 3rd, 4th harmonic generators for high power(>50MW/cm2) ns lasers, with KTP, BBO crystals
SHG-LBO	temperature controlled LBO SHG unit for high power SHG generation
BBO-UV	doubler / mixer for dye laser / OPO, 189nm ~ 450nm

U-Oplaz also offers custom-built OPO systems based on BBO and KTP crystals:

Model #	Description
BBO-3B I,  BBO-2B I	broadband type I BBO OPO system, pumped by 355nm/ 532nm, covering 410nm ~ 2500nm, up to 60% efficiency, small beam divergence, could be seeded by dye/diode laser oscillators
BBO-3B II  BBO-2B II  KTP-2B II	type II BBO/KTP OPO system, pumped at 355nm /532nm, covering 410nm ~ 2500nm with 1-5cm-1 FWHM, etalon option gives <0.2cm-1 to SLM operation
BBO-3B II  BBO-2B II  KTP-2B II	type II BBO/KTP OPO system, pumped by 355nm /532nm, covering 410nm ~ 2500nm with 1~5cm-1 FWHM
BBO-3B I GS	type I BBO OPO system, pumped by 355nm, with coupled grazing incidence grating design gives <0.4cm-1 FWHM from 410nm ~ 2500nm, requires 40-50 mJ of pump energy

C-Doubler gives more UV power!

Conventional doubling/mixing scheme uses tight focusing to get better conversion efficiency into the UV or visible. This results in bad beam shape (elliptical, line), short crystal lifetime and the conversion efficiency is not good. U-Oplaz now introduces C-Doubler which effectively solves these problems.

To design the proper kind of C-Doubler for your system, please give us your laser parameters:

1. Central Wavelength of your laser?
2. Output wavelength?
3. Beam mode?
4. Power/energy per pulse?
5. Pulse width and repetition rate?
6. Divergence and beam diameter?