Optical Parametric Oscillators

Optical Parametric Oscillators
                                                                                -- covering 410nm to 2500nm start at $9,000

BBO-3B I	BBO-3B II	BBO-3B II Et
BBO-3D	BBO-2S, KTP-2S	Photo-acoustic Cell

BBO 3B II Et 
                                      --a low cost approach for high resolution

By adding an etalon inside BBO-3B II OPO device, the BBO-3B II Et gives an easy approach to get high resolution out of an OPO system. The insertion of the etalon model is very straight forward and the whole spectral range of the BBO-3B II OPO could be covered by 5 sets of etalons. Two resolution options are offered.

Specifications

Specification	Value	Comments
Tuning Range	420 nm ~ 580 nm, 900 nm ~ 2200 nm	pumped @ 355 nm
Nd:YAG pump requirement	>100mJ @ 355nm, narrow bandwidth, SLM preferred	smooth profile (gaussian or flat top)
Bandwidth	0.2cm^-1 or 0.01cm^-1, depends on choice of etalon	we offer 0.2cm^-1 and 0.01cm^-1 as two options
Pulse width	2 ns shorter than pump pulse	depends on actual pump pulse length
Beam diameter	2-5 mm	depends on input pump beam size

*All specifications are subject to change without notice.

1. For your specific pump laser, please consult with U-Oplaz for suitability for pumping BBO-3B II Et.

mg9.gif (9752 bytes)

Physical Layout:

Same as BBO-3B II, could be upgraded from BBO-3B II by adding the modularized tuning block for BBO-3B Et.

$ PRICE LIST $    
                                       --value, performance and peace of mind

When you think about purchasing an OPO, you also have to think about the maintenance. At U-Oplaz, we give you peace of mind when you purchase U-Oplaz OPO products -- we offer you one year free service on repolishing and recoating of NLO crystals.

List Price (US only)

BBO-3B (manual control, choose type I + model HE, S or R) $9,000
BBO-3B (manual control, choose type II) $12,000

(Broadband OPOs based on other NLO crystals will be close to this price, call for pricing )

On-site installation +$2,000

Computer control +$4,000

Realtime wavelength calibration option, user friendly +$4,000

FBBO-3D (including on-site installation & computer control) from $20,000

(Customized Dye Laser Seeded OPOs based on other NLO crystals will be close to this price, call for pricing)

BBO-2S (including one Diode laser head, computer control) $45,000

(Diode Laser Seeded OPOs based on other NLO crystals (KTP and KNbO₃) will be close to this price, call for pricing)

KTP-1E eye-safe OPO laser $9,900

(Eye-safe OPO based on KTP delivers >10mJ/pulse at hi-repetition rate,
wavelength option: 1.54mm or 1.61mm)

Useful accessories:

OPO Doublers for BBO-3B, BBO-3D (covering 210nm to 450nm) $15,000

Computer control option +$5,000

For other frequency conversion systems covering VUV to IR, call for pricing

Affordable Parts/Service:

Replace/Trade in crystals, a 25% discount below our normal quote price

Repolishing and recoating, first year free, and $350 for each time afterwards