Products from U-Oplaz
ns
Doubler/Mixer for tunable lasers
Ultra-fast
triplers for Ti:S lasers
Crystal
oven & Temperature controller
Motion
control system for NLO crystals ![]()
High performance line
scan CCD camera
![]()
Precision rotation
stages and mounts for NLO crystals ![]()
Now U-Oplaz Technologies, Inc. offers a unique line of Non-linear Optical frequency conversion systems . The products are the direct result of the latest innovations that just come off the very front of research and development, and backed by CASIX's cutting edge crystal technology.
For the ultra-fast laser systems, we offer Ultrafast Triplers, doublers and quadruplers as Harmonic generators for both ps and fs lasers. Our triplers feature the patented design Time Plate TM and is the most user friendly tripler in the market. We also offer OPAs for both fs lasers.
Model # Description SHG-fs, ps Second harmonic generators for ultra fast laser systems, fs and ps FHG-fs, ps Fourth harmonic generator for ultra-fast laser system, fs and ps TP-1A Tripler for amplified ultra-fast laser systems, fs and ps, TP-1B Tripler for ultra-fast laser systems, fs and ps, right after oscillaor fs-OPA fs OPA system for amplified Ti:S laser systems, tunable from 1.4mm to 2.5mm
For the nano-second laser systems, we offer a complete line of Harmonic Generators: SHG, THG, FHG, and 5HG. These harmonic generators come in with designs tailored for different laser systems.
Model # Description SHG, THG, FHG, 5HG 2nd, 3rd, 4th harmonic generators for high power(>50MW/cm2) ns lasers, with KTP, BBO crystals SHG-LBO temperature controlled LBO SHG unit for high power SHG generation BBO-UV doubler / mixer for dye laser / OPO, 189nm ~ 450nm
U-Oplaz also offers custom-built Boardband OPO Systems covering 410nm to 2500nm based on BBO and KTP crystals:
| Model # | Description |
| BBO-3B
I BBO-2B I |
Broadband type I BBO OPO system, pumped by 355nm/ 532nm, covering 410nm ~ 2500nm, up to 60% efficiency, small beam divergence, could be seeded by dye/diode laser oscillators |
| BBO-3B
II BBO-2B II KTP-2B II |
Type II BBO/KTP OPO system, pumped at 355nm /532nm, covering 410nm ~ 2500nm with 1-5cm-1 FWHM, etalon option gives <0.2cm-1 to SLM operation |
| BBO-3B II BBO-2B II KTP-2B II |
Type II BBO/KTP OPO system, pumped by 355nm /532nm, covering 410nm ~ 2500nm with 1~5cm-1 FWHM |
| BBO-3B I GS | Type I BBO OPO system, pumped by 355nm, with coupled grazing incidence grating design gives <0.4cm-1 FWHM from 410nm ~ 2500nm, requires 40-50 mJ of pump energy. |
C-Doubler --gives more UV power!
Conventional doubling/mixing scheme uses tight focusing to get better conversion efficiency into the UV or visible. This results in bad beam shape (elliptical, line), short crystal lifetime and the conversion efficiency is not good. We now offer C-Doubler which effectively solves these problems.
Crystal Oven & driver - 0.1ˇăC accuracy from 20 to 220ˇăC
In response to the demand of precision crystal oven temperature controller, and the trend of miniaturization of optical devices, We now introduce our second generation of Crystal Oven and Temperature Controllers.
Copyright 1998,
U-Oplaz
Technologies, Inc. All rights reserved. Last Revised:
Sep.
20,
1999
Web Page maintained by : Uoplaz@aol.com